Garw – Page 17 – tim dobbs photography

My Fuji x10 and SilverEfex ………

I had a day off today so as the sun was shining briefly this morning I loaded up my Mamiya 645 with some Fuji Pro 400H and my Fuji x10 and popped out while the sun lasted.

While waiting for the film to dry I decided to run through the shots from the X10, some of which I processed using VSCO film 1 presets and the Fuji 400H setting just to see if the actual processed film was similar. (still waiting for it to dry)

All of these however were processed in Silver-Efex to give a Dark, grungy feel which I really like.Any comments very welcome.

click on an image to view larger………. I also have a Film only blog at …….

http://usingfilm.wordpress.com/

and Flickr stuff at ……

http://www.flickr.com/photos/timdobbsphotography/

Another roll of colour film for a change ……..

The weather here has been terrible over the last few weeks and getting out with the camera has been difficult.

I loaded my Nikon FM2n with some expired Kodak Colorplus 200 over 3 weeks ago and only managed to finish it yesterday.

The colours that this film produced were very pleasing when scanned and complimented the subject matter, nicely subdued.

I must say that the FM2n is by far my favorite camera to use especially with the 50mm 1.8 its a quality piece of kit.

I am looking to get a Nikkor 35mm f2.8 Ai which in combination with the FM2n would be my everyday film camera. Thanks for looking

Click on an image to view larger…….

Garw Carnival 2013 & Kodak Portra 400………..

I love my Nikon F4s but as I seem to have collected 50+ cameras over the last 12 months I don’t get to shoot with it very often.

This weekend I decided to load it up with some film and attempt to shoot with it but when I opened the back I realised I had a rewound roll of Kodak Portra 400 sitting in it.

As I have not developed any colour film for a while I was not sure if my C-41 chemistry was shot or not but I thought I would give it a try. (I didn’t even know what was on the film)

To my surprise when the film came out of the tank it was from last years Garw Carnival back in September if I remember correctly and the negs seemed to look ok albeit with a slight yellow cast but after scanning I liked the look so didn’t colour correct them.

Moral of this little story is make sure you remove completed film rolls from your camera and also make a note of what you actually shot on it 🙂

Thanks for looking

Click on an image to view Larger…….

Any comments greatly appreciated 🙂

Christmas Eve walk with a YashicaMat and some T-Max 400…….

A short and sweet blog post today.

I borrowed a YashicaMat from a photographer friend a few months back and it seemed to be over exposing all the time, most probably slow shutter speed problems.

To try to compensate for this I set my light meter to iso 800 and shot some kodak T-Max 400.

These are the results….it seemed to work 🙂

Thanks for looking ….

Pentax Program A & C-41 process B&W film testing………

I picked up a Pentax Program A SLR off ebay last week for less than £10, I couldn’t resist a bargain even though I have an ME Super and MV1 the benefit of the Program A is slightly lost on me as I don’t have any Pentax A lenses but for £10 it was a no brainer.

I also had the opportunity to try out some of West Yorkshire Camera’s C-41 process 400 iso Black & White film which I processed myself at home.

I popped along to a local derelict factory with the hope of capturing some nice contrasty images and I was not disappointed with either camera or film.

All the images were shot using the Pentax 50mm f1.7 lens which gave me lovely detail even shooting at f4.

I don’t normally use C-41 B&W film but I must say this film gave me great results and at the bargain price they charge its definatly worth a try.

Thanks again for looking….

comments most welcome 🙂

also check out my other blog at usingfilm.wordpress.com for more film only stuff

Valley Backstreets with my Fuji x10…………

I popped out yesterday with a newly acquired Pentax MV1 and some ilford FP4 looking to test it out and took along my trusty Fuji x10 as well.

The Pentax worked fine but as it has been a pretty busy weekend I am still to develop the roll of film yet so for a change I am posting some digital stuff 🙂

All of the shots were shot in Raw format and processed in Lightroom 5.

The light was pretty harsh as I went out at midday but it made the B&W conversion that much more gritty which suited the subject matter.

Short and sweet post this time, any comments are greatly appreciated 🙂

My Pentax K1000 out & about in the Garw ………….

Following on from my last blog where I shot my Canon AV1 this is the 2nd camera I picked up at the same time from my local charity shop.

A lot of people say that the k1000 is what they 1st started their photography journey, I myself until now have never used one I began with an Olympus OM1.The first thing that I noticed was the focussing screen was not a split prism like all my other film SLR’s so initially I found foccussing a little hard but got used to it as long as I took my time.It’s quite a heavy camera and slightly larger than most of the others I have but still felt nice in my hands, simple to use with the exposure needle in the viewfinder.It was quite a miserable day so I shot some ilford Delta 400@800 and the results were fine, the camera came with the Pentax 50mm f2.0 which performed great I was going to put on my 50mm f1.7 but to be honest I don’t shoot many frames wide open on film so I stuck with what came with the camera.All in all the camera was very enjoyable to use and I can see why it was the goto camera for teaching students, basic but a great tool for learning (excellent picture quality too). Thanks for looking….. more film stuff on my other blog

http://usingfilm.wordpress.com

click on an image to view larger.

Canon AV1…. My 1st roll………

A few weeks ago I managed to pick up 2 cameras from my local charity shop for the princely sum of £20 each.

They were a Pentax K1000 and a Canon AV1. I have a couple of other Canons A1, AE1 Program and a T90 along with quite a few FD mount lenses so I decided to test the AV1 first.I loaded up with some ilford HP5 and used my Canon 50mm f1.4 for all the shots going from f1.4 through to f11.

I must say I really liked using this camera much more than the AE1 as I shoot mainly aperture priority or manual this camera was more in line with how I shoot, to be honest I don’t really like using the AE1 much.

I popped along to a local derelict factory to see how things performed and the results were great, all the shots here are straight scans which brings me to another point.

I updated my iMac to the new OSX 10.9 Mavericks which seemed to go well except when I went to scan my negatives my Epson Scan software that I use with my v500 scanner said “Not Compatible” so I went to the epson site to update only to find that they have not yet updated their program for any of their scanners.

Luckily I have Windows 7 installed on my mac and scanned using that while I wait for Epson to pull their finger out and update the software (1 week later and still no update…Epson support are pretty poor indeed, a lot of people with scanners as doorstops I expect).

Anyway thanks for looking, comments most welcome 🙂

Click on an image to view larger…….

More film loveliness at my other blog….http://usingfilm.wordpress.com/

Testing Spur Acurol-N with ilford HP5+

A few weeks back and the subject of my last post here I was sent some developer to test out by Spur Photo http://spur-photo.com/.

This time I tried out their Acurol-N developer on some Ilford HP5+. The information I was given by the company was to rate the film at iso 200 and Dev for 12 minutes at a dilution of 1-50 which I proceeded to do.

From what I have read on the web this developer should yield sharper negatives with little effect on the grain so I shot some random stuff which hopefully would show the added sharpness.

I used my Olympus OM1n and 50mm f1.8mc which has given me pretty good clean images especially at f5.6-f11, nearly all the images here were at f8.

I have never shot HP5 at iso 200 before I have nearly always pushed it as I love the contrast and grain I get from it.

I must admit I really like the images that I got, they were very sharp indeed and the grain did not seem as pronounced as I usually get with HP5 especially in large areas of uniform colour like skies in fact it was really quite smooth in comparison.

As I now have a complete darkroom setup I am going to try a few prints from the negs to see what the softer grain looks like.

Both the developers that I have tried have definitely produced different negatives than what I get from my usual dev combinations in a good way and depending on what I am after in the final image I will keep using both.

Thank you again to Spur for giving me the opportunity to try out your products I highly recommend them to all B&W photographers out there 🙂

1st test of new Spur B&W developer……….

I was recently contacted by a German company http://spur-photo.com/ that makes B&W developer to see I I would like to try out their products and blog my results Good or bad.

Needless to say as I love shooting and developing my own film I jumped at the chance and the following images are the 1st results.

I shot some Ilford HP5+ rated at 640 iso and used the Spur NHC diluted 1+12 for 9 minutes @20˚

This developer from what I have seen and read gives nice contrasty sharp negatives and as you can see from the 1st results that is very true.

Even though both the sharpness & contrast is increased quite a bit the grain has not suffered as a consequence which is great when I come to print anything above 10 x 8.

Also both the shadow and highlight detail is very impressive.

I love the look of HP5 and after my 1st try of this Developer/film combination I am extremely happy with my results as they give me the type of images I love.

All the images below are straight scans with some dust removal but no other editing.

click on an image to view larger….