My 1st roll of Fuji Industrial 100 …..

There are not too many 35mm film stocks that I have not had experience of shooting but Fuji Industrial 100 has escaped me until now.

Normally from what I have read on the web only available in Japan but a few online uk vendors have been stocking it at reasonable prices.

As described by Analogue Wonderland

“Fujifilm Industrial 100 is a gorgeous colour negative film with exceptional sharpness, natural skin tones, and faithful colour reproduction.”

I didn’t shoot any portraits so I cannot vouch for the natural skin tones but the colours were gorgeous and the sharpness is excellent.

The images were shot on my Pentax Program A & 50mm f1.7.

I had the film developed and scanned by Filmdev who as per usual did a wonderful job.

Here is a selection of the images …..

 

Please click a photo to view larger

All images on my blog are available as prints just drop me an email

I also have a film only blog over at  usingfilm.wordpress.com if you want a peek 🙂

1st time shooting Lomography Potsdam Kino 100 ….

It’s great that in the last few months there has been a few new film stocks hitting the market which can only be good for us film shooters.

Potsdam Kino is a B&W cine film along the lines of the Berlin Kino film that was launched previously by Lomography.

It is 100 iso film with a supposedly wide exposure latitude according to reports on the interwebs so I loaded up my Mamiya C330 on an overcast yet quite bright day and went out to see how it performed.

I developed it in ID11 1+1 dilution for 7 minutes.

The negatives looked great out of the tank .. nice and punchy looking contrast and pretty sharp at first glance.

Once scanned and into lightroom a was pleased to say very little editing was required as the scans yielded excellent shadow and highlight detail and apart from slightly bringing down the highlights and pushing the shadows a bit they looked great, contrasty and sharp.

I have some in 35mm format which I am looking forward to trying just to see if I get the same results as sometimes I find it a bit harder to pull out detail in the shadow areas when using 35mm compared to 120.

So if you like punchy/contrasty/sharp images with minimum grain then give this film a go and you won’t be disappointed.

Anyway here is the whole roll … comments most welcome

 

 

Please click a photo to view larger

All images on my blog are available as prints just drop me an email

I also have a film only blog over at  usingfilm.wordpress.com if you want a peek 🙂

Lomography Color Negative 400 at the car show ….

A couple of weeks ago there was a small classic car show here in Bridgend town centre and as we were blessed with a bit of sunshine I loaded the Nikon F100 with my favourite colour film stock .. Lomography Color Neg 400 along with the Nikkor 50mm f1.4 and went down with the intention of getting closeup and detail shots as well as the normal car shot.

This film always gives it’s best when shot in good light and didn’t disappoint this time with lovely popping colours along with excellent detail.

I had the roll developed and scanned by Filmdev which as usual gave great results.

If you have never tried this film before then get your hands on some and give it a go I am sure you will be happy.

Anyway here is a selection of images ….. well to be honest it is almost the whole roll 🙂

Please click a photo to view larger

All images on my blog are available as prints just drop me an email

I also have a film only blog over at  usingfilm.wordpress.com if you want a peek 🙂

Kodak Vision 3 50D in the sunshine ….

I have quite a few rolls of Kodak Vision 3 50D along with a few other rolls of various motion picture stock in my fridge.

I had been waiting for some good light to try the 50D to see how it performed as I really liked the 250D when it was processed in both C41 & ECN2 chemistry.

I hadn’t shot my Pentax Program A for a while so I went out for a walk to see what I could get in the sun.

As I was pretty impatient I developed the roll in C41 as I don’t have any ECN2 chemistry yet.

The initial scans where pretty flat which isn’t a surprise but once I got them into Lightroom and just tweaked the Dehaze slider the images really popped.

The grain was pretty smooth which is to be expected with a film rated at 50 iso and it was pretty sharp as well.

Overall I really like the look of this film stock, it’s not as versatile as 250D or 500T but if you have good light it is definitely a film I want to shoot more of but next time I will develop in ECN2 chems.

Anyway here is a selection of shots from the roll …. comments welcome 🙂

 

Please click a photo to view larger

All images on my blog are available as prints just drop me an email

I also have a film only blog over at  usingfilm.wordpress.com if you want a peek 🙂

1st roll of Lomochrome Purple XR 100-400 in the Yashicamat 124G … all 12 frames

Following on from my last post where I shot my 1st roll of the new Kodak Ektachrome showing all 36 frames … today’s post features Lomochrome Purple in 120.

I was pretty excited to try this film as I loved the look of most of the posts that I have seen on the internet.

I was concerned that I may end up with a roll of pink images rather than purple so I took some hints and shot it at 200 iso on a bright day and focused on predominantly green subject matter as I had heard that this gave more purple images.

I had the developing/scanning done by my fav lab FilmDev with an added note that I would prefer purple over pink when it came to the scanning.

I was well happy with the results which did lean more to the subtle purple side but there was a variation in some of the skies with some looking almost monochrome while others had a slight yellow/green tint.

The grain and sharpness was excellent ….

Here are all 12 frames … comments most welcome

Please click a photo to view larger

All images on my blog are available as prints just drop me an email

I also have a film only blog over at  usingfilm.wordpress.com if you want a peek 🙂

 

Trying ilford XP2 at different ISO ratings on one roll ….

This started off as a proper test as I had read in various places that you can shoot XP2 at different ISO ratings without changing the development times.

My plan was to load up my FE2 and over the space of a few days/weeks shoot the roll in different situations that required possible pushing/pulling and write down the setting to see what happens when I develop the roll eg.  does it work??

The experiment went pretty good initially but about 20 frames into the roll I managed to lose my little notepad with my settings on which essentially ballsed up the whole thing as I do not have the settings to correspond to the images.

What I can say is that I shot the roll between 200-3200 iso … the shots in the bright sunshine were at the end of the roll after I realised I had lost my notepad so I think they were all 200-400 while the shot of my son on his phone was definitely at 1600 iso.

All in all after a little tweaking in Lightroom every frame I shot was perfectly useable with the higher ISO shots exhibiting quite a bit of grain but I like grain so to me that was an added bonus.

Well here is a selection of images … comments most welcome …

Please click a photo to view larger

All images on my blog are available as prints just drop me an email

I also have a film only blog over at  usingfilm.wordpress.com if you want a peek 🙂

 

Testing some Kodak 5325 Commercial Internegative film …..

I was kindly given a roll of Kodak 5325 a while back from a fellow Twitter photographer which I had forgotten about until I came across it the other week and after a little bit of research on the interwebs I realised that I could process it myself as it was C41 so I went out on a lovely bright day with my Pentax Program A and gave it a try.

Kodak  internegative is supposed to make color negative copies of slides for reproduction also I was led to believe that it may even be Tungsten balanced and an iso rating of 8-50 ish depending on lighting conditions.

I decided against any filters and shot half the roll at iso 25 and the rest at 50 just to see what came out.

The first thing that I noticed was a very strong “Light Leak” which  I initially believed may have been my camera but after messaging my film donor he said that a few of the rolls that he tried came out similarly to mine so I breathed a sigh of relief that my trusty Pentax was fine ( I shot another roll of Fuji 200 to test the next day)

The images with the light leak were very pleasing I actually like the look and I don’t think they spoil the images.

There was quite a varied colour cast throughout the roll and some frames were a lot cooler than others which I thought was the different iso settings but that was not the case as they were mixed through the roll and I shot the 1st 10 images at 25 followed by 50 iso for the remainder.

I could have colour balanced all the images in Lightroom but decided to just leave them as they were.

If I get any more of this film I would definitely shoot it at 25 iso or less as all the original scans were slightly underexposed which was sorted in Lightroom.

Please click a photo to view larger

All images on my blog are available as prints just drop me an email

I also have a film only blog over at  usingfilm.wordpress.com if you want a peek 🙂